[nafex] Re: Alternate Tools (or) On the cheap.

Sam Franc franc at harborside.com
Wed Nov 15 17:36:13 EST 2000


For those that want to enlarge on their knowledge of stainless you can read up
on a simplyfied  synopsis of it in Marks Handbook for Mechanical Engineers.
Alloys that contain 20% to 30% Nickle are non magnetic.
Sam

Tom Volkening wrote:

> I don't want to start a flame war here but some of the information in Mr.
> Olson's message is wrong. I can't tell you about the magnetic properties of
> various grades of stainless steel but I assume that the amount and kind of
> elements added to the steel would effect it's magnetic properties.  However,
> there is no such thing as stainless steel without iron in it or "non ferrous
> stainless steel".  All steels are primarily iron.  Here are general
> definitions for steel and stainless steel taken from one of the reference
> books in the Engineering Library where I work.
>
> "Iron containing more than 0.15 percent by weight of carbon chemically
> combined is normally termed steel."
>
> "Stainless steel is a family of iron-chromium-based alloys, which are
> essentially low-carbon steel alloys that contain a percentage of chromium
> above 10.5 percent by weight.
>
> Cardarelli, Francois. Materials Handbook: a Concise Desktop Reference, New
> York:Springer-Verlag, 2000.
>
> Tom Volkening
> Engineering Library
> 1515 Engineering Building
> Michigan State University
> East Lansing, MI 48824-1226
> Phone:  517-432-1498
> Fax:      517-353-9041
> Email:    volkenin at mail.lib.msu.edu
>               volkenin at egr.msu.edu
>
> -----Original Message-----
> From: DocKW at aol.com [mailto:DocKW at aol.com]
> Sent: Wednesday, November 15, 2000 8:22 AM
> To: nafex at egroups.com
> Subject: Re: [nafex] Re: Alternate Tools (or) On the cheap.
>
> Sorry guys, You have the magnetic properties of the various steels reversed.
> A super shiney surgical stainless will NOT stick to a magnet. A "lesser
> quality"
> stainless will exhibit some magnetic properties; a high carbon stainless
> will
> likely stick even more since you can't get carbon into a totally non ferrous
>
> stainless steel.
> This all relates to their intended uses.  A blade likely should contain some
>
> iron so it will harden and hold an edge...but will stain more.  I use
> stainless scalpels which are sharp at the get-go ,but the really good ones
> are mostly carbon steel and are not stainless.
> If you have pots that don't stick to a magnet, they are the quality you seek
>
> in a pot for processing fruits....they are the " high quality"
> stainless....with no iron.
> I find that I can still taste the metal in the final product if left any
> amount of time
> (such as overnight to cool)...so remove the processed fruit to a glass
> container as soon as possible.
> Karl Olson
>


-------------------------- eGroups Sponsor -------------------------~-~>
eLerts
It's Easy. It's Fun. Best of All, it's Free!
http://click.egroups.com/1/9699/0/_/423498/_/974327559/
---------------------------------------------------------------------_->






More information about the nafex mailing list