[Market-farming] cooler

mcoldiron mcoldiron at crcom.net
Wed Apr 1 20:33:56 EDT 2009


Thanks Sailor Breck.  Sometimes old knowlege gets lost and forgotten in favor of what "new today".  Thanks for your support.

TxBeeFarmer (Mark)
West Texas Zone 7b
  ----- Original Message ----- 
  From: breck 
  To: 'Market Farming' 
  Sent: Monday, March 30, 2009 3:21 PM
  Subject: Re: [Market-farming] cooler


   

  Good advice and cool tips. I have fooled around with sailboats for a number of years and copper has been used in painting hulls (for a long time) to stop algae growth.

  Thanks,

  Sailor Breck

   

   

   


------------------------------------------------------------------------------

  From: market-farming-bounces at lists.ibiblio.org [mailto:market-farming-bounces at lists.ibiblio.org] On Behalf Of mcoldiron
  Sent: Monday, March 30, 2009 2:02 PM
  To: Market Farming
  Subject: Re: [Market-farming] cooler

   

  If you spray a very dilute copper compound on the walls, mold won't grow.  It doesn't take much copper to do the trick.  Copper has been used for hundreds of years to inhibit mold and algae growth.  A few pennies in a fountain will keep it looking clean.  I can put a short piece of shiny copper wire in a jar of sugar water and it can sit for months without molding or fermenting.  Otherwise it only takes just a few days to get moldy.  You can get copper based treatments made to spray on plants at almost any nursery, or you can mix up your own using copper sulfate crystals (this would be my choice) used to kill roots in sewer pipes.  Copper Sulfate can be found in hardware stores in the plumbing section.  It's a deep blue in color.  You shouldn't be able to see  any color change on the wall after it's sprayed on, especially if the wall is already blue.  Copper in small amounts is absolutely safe for people and animals (except fish).  Copper water pipes are still used in homes today, not to mention jewelry.  Please note, copper will also kill water plants and fish at low concentrations.  It will kill regular plants in high concentrations, hence the use for getting roots out of sewer pipes.  Also note, copper will inhibit and kill mold and algae, BUT it won't remove it or take away the stains.  You may need to use some bleach and water to make the foam board look good.  Bleach might negate the effects of the copper, so try to get as much of it off the foam as you can before using any copper compounds on.  

   

  Hope this helps.

   

  TxBeeFarmer (Mark)
  West Texas Zone 7b

   

  On 3/30/2009 11:48:20 AM, Andy Fellenz (fellenz at fltg.net) wrote:
  > What are people's experiences with blue foam interiors on home-made
  > walk-ins?  Has anyone had mold or mildew problems or complaints from
  > Health or Ag& Mkt departments about the fact that the surface is not
  > washable?
  > 
  > Andy
  > 
  > 
  > _______________________________________________
  > Market-farming mailing list
  > Market-farming at lists.ibiblio.org
  > http://lists.ibiblio.org/mailman/listinfo/market-farming



------------------------------------------------------------------------------


  _______________________________________________
  Market-farming mailing list
  Market-farming at lists.ibiblio.org
  http://lists.ibiblio.org/mailman/listinfo/market-farming




------------------------------------------------------------------------------



  No virus found in this incoming message.
  Checked by AVG - www.avg.com 
  Version: 8.5.285 / Virus Database: 270.11.32/2030 - Release Date: 03/30/09 08:40:00
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ibiblio.org/pipermail/market-farming/attachments/20090401/2e251ea2/attachment.htm 


More information about the Market-farming mailing list