[BL] TEAC PCMCIA CD drive not working

baslinux at lists.ibiblio.org baslinux at lists.ibiblio.org
Sun May 4 23:26:31 EDT 2008


baslinux at lists.ibiblio.org wrote:
> Message from Steven
> ===================
>
>   
>> when I do insmod tcic.o, I get:
>> Using tcic.o
>> insmod: not an ELF file
>> insmod: Could not load the module: Success
>>     
>
> My oh my, there's a classic error message for you.
> Take your pick:  Failure or Success.
> I haven't a clue what it means.  It appears you
> installed both the tcic and i82365 modules.  As
> I say, I'm no expert here, but I think the tcic 
> module is a replacement for i82365 (can anybody 
> confirm this?) so installing both of them might 
> be generating an error.  
>
> IIRC, this is the first time someone has had your
> particular problem; i.e. no beeps and a terse
> unsupported message (with no manfids or other
> info).  I could understand it if your card were
> cardbus (because BL3 is incapable of dealing with
> those); but with ordinary PC card PCMCIA we should
> be getting more than this.  That's why I'm thinking
> you might be the BL3 user to require tcic, but it's 
> really just a shot in the dark.
>
> Are you the same guy that couldn't get the wireless
> card to work?  If so, there might be something
> nonstandard (or malfunctional) in your hardware.
>
> Cheers,
> Steven
>
>
>
>
>
> -----------------------
> BasicLinux mailing list
> -----------------------
> http://www.basiclinux.com.ru
> http://www.ibiblio.org/pub/linux/distributions/baslinux/
> ------------------------------------
> To exit, send subject=unsubscribe to
> baslinux-request at lists.ibiblio.org
>
>   
No, I wasn't.
So is there a way to remov the i82365 module?
Actually, should I reboot? (dumb if I didn't do it).



More information about the BasLinux mailing list