[BL] Subject: Re: i810 Chip and Uclibc for BL (was: ....)
sindi keesan
keesan at sdf.lonestar.org
Tue Jan 23 00:13:29 EST 2007
On Mon, 22 Jan 2007, David Moberg wrote:
> sindi keesan wrote:
>>
> [i810 video w/ svgalib]
>> What chipset is specified in /etc/vga/libvga.config?
>
> AFAIK VGA, VESA, and nothing all work.
>> David Moberg compiled a recent version in his 1-floppy-disk USB linux boot
>> disk which Christof recently used. From my site or David's. With the
>> 1.4.3 libvga compiled against uclibc.
>
> Worked perfectly when I tested it on an i810. Did you try it?
I replaced onboard i810 with something easier to use. Lee could copy over
zgv-uclibc and libvga*.so and the uclibc libc, libm, and ld-linux from
that disk to BL3 to use zgv there. It worked for me when I wanted to try
the newer version in BLe. But those libraries then won't work with libc5
gs from SW4.0. So I put back the older libvga*.so libraries.
>> xfbdev that David compiled crashes if you switch terminals.
> That's libc5. Not a uClibc problem.
Were you unable to compile with uclibc?
> David
Sindi
More information about the BasLinux
mailing list